Replacement Rubber Feet for Floor Fan 1" x 1/2" - Non-Slip, and Shock Absorbing.
Price per piece by quantity
- 1–49 pcs$0.41
- 50+ pcs$0.37
- 500+ pcs$0.33
- 1,000+ pcs$0.29
- 2,500+ pcs$0.25
- 5,000+ pcs$0.21
Bulk Discounts
| Quantity | Discounted price |
|---|---|
| Buy 1 – 49 pcs | $0.41 /each |
| Buy 50 – 499 pcs | $0.37 /each |
| Buy 500 – 999 pcs | $0.33 /each |
| Buy 1000 – 2499 pcs | $0.29 /each |
| Buy 2500 – 4999 pcs | $0.25 /each |
| Buy 5000 + pcs | $0.21 /each |
Need 5,000+ pieces or a recurring order? Request a bulk quote
Replacement Rubber Feet for Floor Fan 1" x 1/2" - Non-Slip, and Shock Absorbing. is backordered and will ship as soon as it is back in stock.
Sizing help: Rubber feet size chart All 7 sizes in this range Shop all Rubber Feet Inch ↔ mm converter
Couldn't load pickup availability
- Usually ships within 24 hours from Elgin, SC (shipping policy)
- UPS or FedEx with a tracking number on every order
- Returns accepted up to 30 days after delivery (return policy)
- Bulk discounts by quantity, quotes for large orders (request a quote)
- OD
- 1"
Frequently bought together
-
49 × $0.41
-
3/4" x 3/8" Rubber Bumper Feet with Built-In Metal Washer - Non-Slip, and Shock Absorbing.Ordered together by other customersfrom $0.46choose a size
-
1" x 1" Rubber Bumper Feet with Built-In Metal Washer - Non-Slip, and Shock Absorbing.Recommended with this partfrom $0.78choose a size
-
1" x 1/2" Rubber Bumper Feet with Built-In Metal Washer - 7/32" Screw HoleRecommended with this partfrom $0.55choose a size
Each line starts at the $20.00-per-item minimum; Bulk Discounts tiers apply by quantity.
Description
Description
Replacement rubber feet for floor fans — the round screw-on feet that stop a box, pedestal or high-velocity floor fan from walking across the floor and scratching it. Original fan feet harden, crack or fall off; these 1" x 1/2" rubber feet screw back into the base and restore grip and quiet.
Specifications
- Diameter: 1"
- Height: 1/2"
- Recessed hole opening: 1/2"
- Screw hole diameter: 7/32" (fits a #10 or 3/16" screw)
- Sold individually: $0.41 each, bulk pricing applies in the cart
Will they fit my fan?
Measure the old foot's diameter and height and the screw that held it. If it is about 1" across and the screw passes through a counterbored hole, this foot is a direct swap. The recess lets the screw head sit below the rubber, so it never touches the floor. Most fans need 4 feet.
How to install
- Unplug the fan and turn the base over.
- Remove the old screws and any leftover rubber.
- Set the new foot over the hole, recess facing out, and drive the screw until snug — don't over-tighten.
- Stand the fan up and check it sits level without rocking.
Need a different size?
See all rubber feet by diameter and height, or the screw-on and recessed feet for appliances, speakers and equipment.
How to Match Your Old Feet
How to Match Your Old Feet
Measure the diameter and height of the old foot, plus the screw hole in the recessed washer. The specs below list all three. The built-in metal washer stops the screw head from pulling through - snug it flush, don't crush the rubber.
Delivery and Shipping
Delivery and Shipping
Usually ships within 24 hours from our South Carolina warehouse. All orders include tracking.
Similar Products
1" x 1" Rubber Bumper Feet with Built-In Metal Washer - Non-Slip, and Shock Absorbing.
SKU: RF11NSCWS
From $0.78Unit price /Unavailable
1" x 1/2" Rubber Bumper Feet with Built-In Metal Washer - 7/32" Screw Hole
SKU: RF112732NSCWS
From $0.55Unit price /Unavailable
1" x 1/2" Rubber Bumper Feet with Built-In Metal Washer - 5/32" Screw Hole
SKU: RF112532NSCWS
From $0.51$0.55Unit price /Unavailable
1" x 5/8" Rubber Bumper Feet with Built-In Metal Washer - Non-Slip, and Shock Absorbing.
SKU: RF158NSC
$1.47$1.84Unit price /Unavailable
SKU: RF1716NSC
$0.83Unit price /Unavailable
1" x 7/16" Sliding Shower Door Rubber Bumper Stopper - Non-Slip, and Shock Absorbing.
SKU: RF1716NSC
$0.83Unit price /Unavailable
Rubber Feet for Vintage Table Fan or Desk Top Fan - Non-Slip, and Shock Absorbing.
SKU: RF112732NSCFN
$0.41Unit price /Unavailable
Rubber Bumper for RV Entry Door Stop Guard 1" x 1" - Non-Slip, and Shock Absorbing.
SKU: RF11NSCRVDG
$0.78Unit price /Unavailable
Replacement Rubber Feet for Floor Fan 1" x 1/2" - Non-Sli...
$0.41 each
Foot Specifications
| Outside Diameter | 1" (25.4 mm) |
|---|---|
| Height | 1/2" (12.7 mm) |
| Pilot / Screw Hole | 7/32" (5.56 mm) |
| Recessed Hole | 1/2" (12.7 mm) |
| SKU | RF112732NSCFN1 |
Diameter x height with screw hole size - match all three to your old foot.
Size & fit guide
| Label | Dimension | Size |
|---|---|---|
| A | Diameter | 1" 25.4 mm |
| B | Height | 1/2" 12.7 mm |
| C | Recessed hole | 1/2" 12.7 mm |
| D | Screw hole | 7/32" |
Schematic, not to scale. Sizes are nominal.
Frequently Asked Questions
What size is this rubber foot?
1" in diameter and 1/2" high, with a 7/32" screw hole and a 1/2" recessed hole.
How do I measure for a replacement foot?
Measure the diameter and height of the old foot, plus the screw hole in the recessed washer. The specifications table lists all three.
How do I attach these feet?
Drive a screw through the built-in metal washer - it stops the screw head from pulling through. Snug it flush; don't crush the rubber.
How fast do you ship?
Orders usually ship within 24 hours from our South Carolina warehouse, with tracking on every order.
Complete Your Repair
We Accept
