Rubber Vibration Isolator Mount (1-1/2 Dia x 1" Ht) 5/16-18 x 5/8 Length Stud
Rubber Vibration Isolator Mount (1-1/2 Dia x 1" Ht) 5/16-18 x 5/8 Length Stud is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Description
Description
- These mounts measure 1" in thickness (rubber height) and 1-1/2" in diameter (rubber diameter)
- Stud is 5/8" Long with 5/16"-18 Male and Female thread.
Provides excellent noise and vibration reduction.
Can be used on/in:
Water pumps
Construction
Automobile
Electronic components
Medical equipment
Home appliance
Mechanical equipment
Office facilities
Aviation
Air compressors
Diesel engines
Gasoline engines
Industrial Machines
and may more applications
M/M, M/F, F/F - Which Configuration?
M/M, M/F, F/F - Which Configuration?
M/M = threaded studs both ends (bolt equipment to frame). M/F = stud one end, threaded insert the other (bolt from one side). F/F = inserts both ends (screws from both sides). Match the thread size and stud length in the specs to your mounting holes.
Delivery and Shipping
Delivery and Shipping
Usually ships within 24 hours from our South Carolina warehouse. All orders include tracking.
Rubber Vibration Isolator Mount (1-1/2 Dia x 1" Ht) 5/16-18 x ...
Mount Specifications
| Rubber Diameter | 1-1/2" (38.1 mm) |
|---|---|
| Rubber Height | 1" (25.4 mm) |
| Stud Length | 5/8" (15.88 mm) |
| Thread Pitch | 5/16-18 |
| Material | Natural Rubber |
| Hardness | 60 Durometer |
Rubber diameter x height, thread size, and stud length below.
Vibration Mount Finder
Answer two questions — we'll recommend the mount size and jump you to the right chart section below.
Full guidance: how to choose vibration isolator mounts.
Frequently Asked Questions
What do M/M, M/F, and F/F mean?
M/M has threaded studs on both ends, M/F has a stud on one end and a threaded insert on the other, and F/F has inserts on both ends. Choose based on which sides you can access with a bolt.
How do I size a vibration mount?
Match the thread size and stud length to your mounting holes, then pick the rubber diameter and height for the load - larger rubber sections carry more weight and isolate lower frequencies.
How many mounts do I need?
Most equipment uses one mount per corner. Distribute the machine weight evenly across all mounts and torque against the metal end faces, never by crushing the rubber.
Complete Your Repair
We Accept
