Sliding Glass Patio Door Rubber Bumper Stop 1" x 1" - Non-Slip, and Shock Absorbing.
Bulk Discounts
| Quantity | Discounted price |
|---|---|
| Buy 1 – 49 pcs | $0.78 /each |
| Buy 50 – 499 pcs | $0.70 /each |
| Buy 500 – 999 pcs | $0.62 /each |
| Buy 1000 – 2499 pcs | $0.55 /each |
| Buy 2500 – 4999 pcs | $0.47 /each |
| Buy 5000 + pcs | $0.39 /each |
Sliding Glass Patio Door Rubber Bumper Stop 1" x 1" - Non-Slip, and Shock Absorbing. is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Description
Description
This sliding glass door bumper stop (1" x 1" solid rubber) mounts in the track or frame to stop a sliding glass patio door before it slams into the jamb — absorbing the impact that cracks frames, rattles glass, and chips paint. Solid rubber construction compresses and recovers for years of daily use, indoors or out.
What It Fixes
Patio sliders that bang at full open or close, doors that bounce back off the frame, glass rattle at impact, and worn or missing factory sliding door rubber stops. Also works as a general-purpose rubber stopper anywhere a moving panel needs a cushioned stop — pocket doors, gates, and sliding cabinet panels.
Specs & Installation
1" x 1" solid rubber bumper; screw-mounts to the track, jamb, or frame at the door's contact point. Weather-resistant for exterior sliders. For glass shower doors, use the compact 1" x 7/16" shower door stopper; for RV entry doors, see the RV door stop guard. Browse the full rubber door stops & bumpers collection.
How to Match Your Old Feet
How to Match Your Old Feet
Measure the diameter and height of the old foot, plus the screw hole in the recessed washer. The specs below list all three. The built-in metal washer stops the screw head from pulling through - snug it flush, don't crush the rubber.
Delivery and Shipping
Delivery and Shipping
Usually ships within 24 hours from our South Carolina warehouse. All orders include tracking.
Sliding Glass Patio Door Rubber Bumper Stop 1" x 1" - Non...
Foot Specifications
| Outside Diameter | 1" (25.4 mm) |
|---|---|
| Rubber Diameter | 1" (25.4 mm) |
| Rubber Height | 1" (25.4 mm) |
| Height | 1" (25.4 mm) |
| Pilot / Screw Hole | 5/32" (3.97 mm) |
| Recessed Hole | 5/16" (7.94 mm) |
| Fastener | Screw-mount through recessed metal washer |
| Shape | Round |
| Material | Rubber |
| Finish / Color | Black |
| Pack Quantity | 1 |
| Applications | Sliding Door Bumper, furniture, appliances, and equipment |
Diameter x height with screw hole size - match all three to your old foot.
Frequently Asked Questions
What is a self-tapping screw?
It cuts its own thread as it drives - no tap, no nut, no insert. Type A has a coarse sharp point for thin metal and wood; Type AB adds tighter thread spacing for metal, plastic, and wood.
What pilot hole should I drill?
The recommended pilot for this size is in the specs table. Drill it in sheet metal; skip the pilot in soft plastic or thin wood.
Will these rust?
They are zinc plated for corrosion resistance in indoor and sheltered use. For constant outdoor exposure or marine use, ask us about stainless alternatives.
Complete Your Repair
We Accept
