If a machine in your home buzzes, hums, walks across the counter, or leaves marks on the floor, the fix is almost always the same: replace the hard plastic or worn feet with solid rubber feet, screw-mounted so they can't fall off. Here's the fix by machine.
Mini fridge or wine cooler buzzing
Compressor vibration amplifies through hollow plastic feet into cabinets and countertops. Four solid 1" x 1" rubber feet absorb it at the source.
Sewing machine walking at high speed
Vintage machine feet harden and lose grip after decades. Replacement 1" x 1/2" feet use your machine's original screws and restore factory grip.
Subwoofer rattling the room
Boominess is usually the floor, not the sub. Isolation feet decouple the cabinet for tighter bass and fewer neighbor complaints.
Treadmill creeping and thumping
Big 1-1/2" rubber feet absorb footstrike before it reaches the floor - the same trick works for squat racks and gun safes.
Air fryer or mixer scooting across the counter
1" x 1/2" appliance feet take the small #6 screws countertop appliances already use.
PC tower humming through the desk
Hard drives and fans resonate through hollow desks. Low-profile 3/4" feet break the coupling.
Why screw-mount instead of stick-on
Adhesive pads peel off with heat and shear. Every foot above has a metal washer molded inside a recessed screw hole - one screw per foot, permanent, and the washer prevents pull-through. Choose the + Screws option on any 4-pack and the exact matched screws come in the bag. Not sure which screw? See our screw size chart for rubber feet or browse the full recessed rubber bumper feet collection.