Rubber Feet for Speakers and Subwoofers (1-1/2" x 1-1/2")
Why speakers and subwoofers benefit from rubber feet, how they compare with spikes and pads, and how to fit a 1-1/2" x 1-1/2" screw-on foot to a cabinet.
Rubber Feet Warehouse |
News
-
-
Sink Grid Rubber Feet: How to Measure and Replace Them
The little rubber feet on a stainless sink grid wear out and fall off, leaving bare wire to scratch the sink. How to measure the grid, pick replacement feet and...
Rubber Feet Warehouse |
-
Push-In Rubber Bumpers and Stem Bumpers: How to Measure and Choose
Push-in rubber bumpers (stem bumpers) snap into a hole with no screws or glue. How to measure the hole and panel, choose base size and height, and find the right...
Rubber Feet Warehouse |
-
How to Stop Appliances and Equipment From Vibrating, Walking, and Scratching Floors
The fix for buzzing mini fridges, walking sewing machines, rumbling subwoofers, and treadmills that creep: solid rubber feet with embedded washers, matched by machine.
Rubberfeetwarehouse |
-
What Size Screw Do I Need for Rubber Feet? (Complete Chart)
Match the right screw to every rubber bumper foot size - #6, #10, and #12 screw chart by foot diameter and height, with links to feet that include the screws.
Rubberfeetwarehouse |
-
How to Replace the Rubber Feet on Any Laptop (HP, Dell, Lenovo, MacBook)
Manufacturers don't sell laptop feet separately, but any laptop can be re-footed in five minutes with universal self-adhesive rubber feet — here's the sizing and the install trick that makes...
Rubber Feet Warehouse |
-
How to Keep a Cutting Board from Sliding: 5 Fixes Ranked (One Is Permanent)
The damp-towel trick works until it doesn't. Here are five ways to stop a cutting board from sliding, ranked — and the one fix board makers actually use.
Rubber Feet Warehouse |
-
Screw-On vs Push-In vs Self-Adhesive Rubber Feet: Which Should You Use?
The three mounting styles of rubber feet each have a best use case. Match the mounting style to your material and load before you pick a size.
Rubber Feet Warehouse |
-
What can I put rubber feet on?
Rubber Feet can be applied on Furniture, Sofas, Tables, Chairs, PC Cases Power Washers, Speaker Cabinet Feet, Subwoofer Box, Shelving, Pedalboards, Guitar Amps, Turntable, Stools, Desks, Benches, and many other...
Stefano Dixon |
